Something that many drivers in the Bedford. PA. area think little about is the proper inflation of their tires. Because the tires are essentially, one of the most important components of your vehicle; as they are the only thing that connects your car to the pavement… this can be quite an important topic. Proper inflation of your tires not only helps with the steering performance of your vehicle, stopping agility and ride performance but also can affect your fuel mileage.
Town Hill auto repair service in Bedford, PA. is your trusted auto repair facility for all of your vehicle repair and maintenance needs. Check out this useful article on how to properly check and fill your tires.
There is an express difference between the tire pressure recommendations on the tire and the tire pressure recommendations by the manufacturer the vehicle. Town Hill Auto Repair Service in Bedford, PA. recommends that you always check the tire pressure settings recommended by the manufacturer for the proper inflation of your tires. These tire pressure settings, as well as tire size recommendations, have been expressly established to work with your vehicle’s speed sensor and inflation monitors equipped on most modern vehicles. This information is used by the vehicle’s computer as a key input for vehicle performance and function.
NOTE: The tire pressure sticker is located on most vehicles in the driver’s door jam. Other places would be the glovebox or the owner’s manual. Let’s get Started Checking the Tire Pressure
Town Hill Auto Repair Service in Bedford, PA recommends placing your vehicle on a flat surface, if possible when the ambient outside temperature is between 60 and 80°. This is so that you can get the best and most accurate measurement of your actual tire pressure.
We recommend purchasing a tire pressure gauge from a your local Napa auto parts store rather than the gauge found at the self-service air pump stations in Bedford, PA. The air pump station’s gauge is used, dropped, kicked and driven over that is accuracy can sometimes be skeptical. It’s always a great idea to keep a tire pressure gauge in your glovebox, most can be purchased for less than $10. Gauges can be manual or digital with a pencil measurement, gauge or digital readout available. Napa auto parts carries pencil gauges for little as $5 dollars.
Releasing Air - With most tire pressure gauges there is an extrusion on the gauge to make it easy to release the air pressure if the tire is overinflated. The Schrader (or needle) valve into center of the air valve allows you to release air by pressing it. Release air in short two second bursts as to not release too much air.
Adding Air - If the tire pressure is too low, add air. Depending on the type of device you’re using to inflate the tire, times will vary. If you’re using one of the air stations usually they run 2 to 3 seconds per pound of air. Recheck the tire pressure after each time adjusting as needed to reach the manufacturers specification.
NOTE: You can always swing by Town Hill Auto Repair Service in Bedford, PA. for a free tire pressure check and adjustment.
Town Hill Auto Repair Service in Bedford, PA. can help you ensure your tires are properly filled. Being that your tires are the only part of your vehicle that connect you to the road we see it as the most important element of your vehicle. Having the right amount of air in your tires could be the difference between an accident in the rain and getting home safely. Be sure to ask your service advisor about tire options that meet your driving needs.
Learn more about wheels and tire services provided by Town Hill Auto Repair Service in Bedford, PA. - Click Here
Learn more about the staff at Town Hill Auto Repair Service in Bedford, PA. - Click Here